Skip to content

We measure every opening at your free in-home estimate: (626) 654-3121

(626) 654-3121
Installer in a tool belt fits a white vinyl window into a stucco wall opening under a covered back patio, with another window leaning on the wall and tools on the slab

Window Replacement in South San Jose Hills From a Crew That Does Only This

We swap tired aluminum and single-pane windows for dual-pane, energy efficient units. We also replace sliding doors, put in multi-folding doors and build custom glass railings. Homeowners in South San Jose Hills, La Puente and West Covina start with a free estimate at the house, with no pressure to sign.

  • CSLB C-17 licensed
  • 12 years in business
  • 30 years of window installation
  • No-pressure home visits

What We Replace and Install

Most of our days are spent on window replacement: pulling worn frames and setting new dual-pane units that close tight and lock right. We also do window retrofitting, window installation for new openings and energy efficient windows for rooms that bake in the afternoon sun. On the door side, we handle sliding door replacement and multi-folding doors that open a full wall to the yard. For decks and balconies, we build custom glass railings.

  • Installer in a cap and tool belt fits a new white double-hung window into a brick wall of a single-story house, with a ladder, drop cloth and old window nearby

    Window Replacement

    We swap worn-out aluminum and single-pane windows for new ones that seal tight, open easily and keep summer heat outside.

  • Installer in gloves and cap, seen from behind, lifting an old sliding glass door panel out of its frame on a stucco house, with a ladder and backyard fence beyond

    Sliding Door Replacement

    We pull out worn aluminum sliders and fit new vinyl or fiberglass sliding doors that roll easily, lock tight and keep summer heat out.

  • Installer in a dark hoodie and tool belt pressing flashing tape around a new white vinyl window set in a wrapped stucco wall opening, with a red stepladder nearby

    Window Installation

    New windows set in new or enlarged openings for additions, ADUs, garage conversions and remodels, framed, flashed and finished to code.

  • Installer in a tool belt adjusting the top track of a black multi-folding glass door, panels stacked at one side, on the back wall of a stucco house opening to a patio

    Multi-Folding Doors

    We frame the opening, set the track dead level and hang folding glass panels so a wide wall of your home opens and closes smoothly for years.

  • Installer in a cap and tool belt caulking around a white vinyl insert window set in an old wood frame on a stucco house wall, ladder and tool bag nearby

    Window Retrofitting

    New dual-pane windows fitted into your existing frames, so the stucco stays put and the job wraps up fast.

  • Installer on a stepladder caulking the top of a new sliding window inside an empty room, with foam sealing the frame gap and a fenced backyard visible outside

    Energy Efficient Windows

    Dual-pane, low-E windows sized to your openings that keep afternoon heat out, quiet the street and take load off your AC.

  • Installer in a tool belt setting a clear glass railing panel into a metal base shoe along the edge of a wooden deck beside a stucco house, with a ladder against the wall

    Custom Glass Railings

    Glass railings for decks, balconies and stairs, cut to exact size and set in hardware matched to the surface it mounts on.

Window installer in a cap and tool belt shows a homeowner frame color samples outside the front door of a stucco house, with a ladder, caulk and tools on the porch

How We Work on Your Home

We keep the job simple. You deal with the people who measure, explain and install, not a sales team.

We measure every opening ourselves
Stucco houses settle, and two windows that look alike can be a quarter inch apart or more. We measure each one at the estimate so what we order fits the first time.
A straight answer on retrofit or full frame
With a retrofit, your new window goes inside the existing frame and the stucco stays put. Full frame strips the opening back to the studs. We tell you which your house needs, why, and show you what we found.
Permits and code handled
We pull the permit when the job calls for one. We also check bedroom egress size and use tempered glass where code requires it, like near doors, tubs and low to the floor.
Your house protected while we work
Drop cloths go down inside, furniture stays clear of the work and plants under the windows get covered. We haul off the old frames and glass and vacuum before we leave.
No pressure at the estimate
The in-home estimate is free and you owe us nothing for it. We go over your options, put it in writing and let you decide when you're ready.

What Changes the Total

Every house is a little different, so we price after we've seen yours. A handful of things decide most of the number. If you know them, comparing two bids gets a lot easier.

After we measure, you get a written estimate with each window and each task on its own line. That price holds unless we both agree to change the scope.

How many windows, how big
Each opening adds parts and hours. Grouping several windows into one order spreads out the setup work. Large picture windows and wide sliders take thicker, heavier glass.
Retrofit versus full-frame
A retrofit sets the new unit inside the old frame, so it goes quicker and the stucco is left alone. Full-frame takes more time because we cut back stucco, flash the opening fresh and patch the wall afterward.
Glass package
Low-E coatings, argon fill and tempered panes each raise the cost. Tempered glass is required in some spots, like next to doors and tubs, and we include it in the estimate from the start.
Window style and finish
A plain slider costs less than a casement or bay unit. Special colors, grids and unusual shapes mean extra factory time.
What's behind the old frame
Pulling an aluminum frame can uncover a rotted sill or soft framing. We stop, show you, and only repair it with your OK.
Reaching the opening
Second-story windows, tight side yards and openings blocked by built-ins need more setup, and sometimes a second installer.

From First Call to Final Walkthrough

Here is how your job goes, step by step, so nothing on install day catches you off guard.

  1. 1

    Tell us what's going on

    On the phone, give us a rough count of windows or doors and what bugs you about them. Drafts, sticking sashes, foggy glass, whatever it is. Then we set a time to stop by.

  2. 2

    A free look at the house

    We put a tape on every window, look over the frames and the stucco around them, and talk through retrofit or full-frame. The estimate comes in writing. Sign when you're ready, not when we are.

  3. 3

    Ordering and paperwork

    Once you say go, your windows are built to our numbers. If the city needs a permit, we file it while the factory works on your order.

  4. 4

    The install

    We cover floors before anything comes out. Old units go, new ones get set level and square, then sealed, flashed or caulked. We open, shut and lock each window before starting the next.

  5. 5

    Cleanup and sign-off

    We load the old frames and glass in our truck and clean up inside and out. Then we walk every room with you, and anything off gets fixed before we leave.

Two workers carry a plastic-wrapped white window with cardboard edging from the back of a white van in the driveway of a single-story stucco home.

About Our Company

We are a small window company that works in South San Jose Hills and the towns around it. Most of the houses we see were built with aluminum sliders and single-pane glass. Those frames get hot, sweat in winter and let in road noise and dust. Swapping them out is the work we know best.

We keep things plain. We show up when we say we will, measure carefully and explain what we find in everyday words. If a retrofit will do the job, we say so. If the opening needs more, we show you why. You get a written estimate and you make the call.

Beyond windows, we install sliding doors, multi-folding doors and custom glass railings. The same care goes into each one: tight seals, proper flashing and a clean house when we are done.

License
CSLB C-17 licensed
In business
12 years in business; 30 years of window installation experience

Questions We Hear Most

Something not covered here? (626) 654-3121

How much does window replacement cost?

The total depends on how many windows you have, their size, the glass and whether the job is retrofit or full-frame. Our current offer is $495 per window with free installation. It needs at least 4 windows per order, and some glass sizes and products don't qualify. At the free in-home estimate, we tell you exactly which of your windows fit the offer.

Retrofit or full-frame: which one do I need?

With a retrofit, the new unit sits inside the frame you already have, and the stucco outside is never touched. Full-frame means pulling the old frame out to the studs and patching the stucco afterward. Plenty of houses around here do fine with a retrofit. Rot or a warped frame can change that, and we'll show you what we see before you decide.

Do I need a permit to replace windows?

A lot of window and door work in California needs a building permit, and it almost always does when an opening changes size. We find out what your job requires and pull the permit when one is needed. New windows also have to meet the state energy code, and the ones we put in do.

How long does installation take?

A whole-house retrofit usually takes one to two days, depending on how many windows and how big. Full-frame work and sliding doors run longer because of the stucco and framing. You'll know the schedule before install day.

Will new windows really make the house cooler?

Dual-pane glass with a low-E coat stops much of the summer heat that pours through single-pane aluminum. West- and south-facing rooms tend to feel it most. Most people also notice less street noise and less dust on the sills.

Do I have to be home on install day?

We need someone there to let us in at the start and to walk the house with us at the end. The rest of the day is yours. We keep the work areas covered and pick up as we go.

Should I move furniture or take down blinds?

It helps if you clear small things off sills and pull blinds and curtains before we arrive. We can shift heavy furniture a few feet if it's in the way. Tell us about anything fragile near a window when you call.

Can you replace my sliding door at the same time?

Yes. Many people do the windows and the sliding door in one job so the glass and frame colors match. We measure the door at the same visit and list it on its own line in your estimate.

Where We Work

We are based in South San Jose Hills and do most of our window replacement close to home. We also work in West Covina, La Puente, Hacienda Heights, Rowland Heights, Diamond Bar, Walnut and Covina. Valinda, West Puente Valley and Avocado Heights are on our regular routes too.

  • South San Jose Hills
  • West Covina
  • Hacienda Heights
  • Diamond Bar
  • Covina
  • Rowland Heights
  • La Puente
  • Walnut
  • West Puente Valley
  • Valinda
  • Avocado Heights

If your town is not listed, give us a ring. If we can reach you for a free in-home estimate, we will tell you right away.

More on the areas we cover

2 mi4 mi6 miWest CovinaHacienda HeightsDiamond BarCovinaRowland HeightsLa PuenteWalnutWest Puente ValleyValindaAvocado HeightsSouth San Jose HillsN
Single-story stucco house with white-framed windows on both sides of a black glass entry door with sidelites, shrubs, curved walkway, and a toolbox and bucket on a drop cloth.

Ready to Get Rid of the Old Windows?

We come out, measure every opening and leave you a written estimate. No pressure, and no cost for the visit.